Description
Tandem rear-tipping trailer with a monocoque body of 4 mm sheet steel, 15 300 kg permitted payload and 13.1 m³ (19.7 m³ with extension walls) capacity. Built for heavy bulk work – grain, aggregates, beet and silage. EU type-approved for use on public roads.
Features and equipment
- Full LED lighting
- Side wall height 1 000 mm with a thickness of 4 mm
- Extensions height 500 mm with a thickness of 2.5 mm
- Hooks securing the rear wall
- External ladder and steps inside the load box, hot-dip galvanized, with anti-slip steps facilitating access to the load box
- Hot-dip galvanized load box service support
- Hot-dip galvanized drawbar with replaceable eye, rubber-damped, homologated
- Bolted coupling eye fi 50
- Load box painted in two stages (primer/topcoat) with high-class paints
- Half-pipe load box made of 4 mm thick steel sheets (walls) and 5 mm (floor). Main longitudinal members of the load box made of closed profiles 150x150x8
- Floor made of a single sheet of 5 mm thick steel
- Hot-dip galvanized bottom frame (protection of the structure outside and inside the profiles), frame longitudinal members made of closed profiles 250 x 150 x 8
- Parking hand brake with crank
- Gravity discharge chute for grain, hot-dip galvanized with a lock in the rear wall
- Hydraulic drawbar support with built-in hydraulic lock
- Homologated bumper hot-dip galvanized
- Inspection window in the front wall, extension
- Rear wall opened hydraulically
- Tipping installation secured with a shut-off valve against excessive tilt of the box
- Lighting installation connection cable with 7PIN 12V plug
- 12V lighting, homologated, rear lights bulb-type, contour lighting LED
- Hydraulic installations made of galvanically galvanized steel tubes and flexible hoses
- Hydraulic connections to the tractor, type ISO 7241-1 DN 12.5
- Homologated two-line pneumatic brake system with automatic braking force regulation with output for the second trailer
- Rear output for hydraulics, electrics, and brakes for the second trailer
- Hydraulic locks on cylinders securing against uncontrolled opening of the rear wall
- New wheels 385/65 R22.5
- Axles from the renowned company ADR, solid beam with a square cross-section of 100 mm, brake 406×120
- Suspension on parabolic leaf springs
- Two wheel chocks placed in galvanized pockets
- Five-stage telescopic cylinder with a stroke of 2 400 mm. Nominal force on the fifth stage with a diameter of 140 mm, at a pressure of 20MPa = 307.9 kN (31.4T)
- Wheel mudguards
Specifications
Specifications — Cynkomet T-617/4 15T EU| 01Body type | monocoque (shell) body, non-pallet width |
|---|
| 02Payload (technical) | ~16 300 kg |
|---|
| 03Payload (registered) | ~15 300 kg |
|---|
| 04Min. tractor power | 81 kW / 110 HP |
|---|
| 05Volume w/o / w/ extensions | 13.1 m³ (19.7 m³) |
|---|
| 06Design speed | 40 km/h |
|---|
| 07EU type / variant / version | T-4 720 61 |
|---|
| 08Own weight | ~5 700 kg |
|---|
| 09GVW (Polish regulations) | 21 000 kg |
|---|
| 10GVW (EU 2015/208, axles only) | 18 000 kg |
|---|
| 11Max. axle load | 1. 9 000 kg 2. 9 000 kg |
|---|
| 12Max. drawbar load | 3 000 kg |
|---|
| 13Length | 7 645 mm |
|---|
| 14Width | 2 550 mm |
|---|
| 15Height w/o extensions | ~2 380 mm |
|---|
| 16Height with extensions | ~2 880 mm |
|---|
| 17Wheelbase | 1 480 mm |
|---|
| 18Wheel track | 1 900 mm |
|---|
| 19Tipping system | rear tipping |
|---|
| 20Tipping angle (rear/side) | — / 45 |
|---|
| 21Box inner length | 6 020 mm |
|---|
| 22Box inner width (front/rear) | 2 200 mm |
|---|
| 23Side wall height | 1 500 mm |
|---|
| 24Floor / wall sheet thickness | 5 / 4 mm |
|---|
| 25Load area | 12.9 m² |
|---|
| 26Platform height | ~1 380 mm |
|---|
| 27Axles | 2 (tandem) |
|---|
| 28Suspension | parabolic leaf springs |
|---|
| 29Tyres | 385/65 R22.5 |
|---|
Specifications may vary with configuration. Ask our sales team for the exact specification.