T-104/4 EU

§ 01 / Description

Two-axle three-way tipping trailer with a turntable drawbar, payload 8 100 kg and load volume 5 m³ (10 m³ with extension walls). Hot-dip galvanised frame and body for long service life. EU type-approved for use on public roads.

§ 01.1 / Features and equipment

• Wall height 500 mm, 2.5 mm thick, hot-dip galvanized
• Central wall locking system (bottom dropsides)
• External ladder and steps inside the cargo box, hot-dip galvanized with anti-slip treads for easy access to the cargo box
• Hot-dip galvanized cargo box service support
• „Y-type” drawbar (triangular) – drawbar type-approved in accordance with UN ECE Regulation 55
• Welded towing eye, 40 mm diameter
• Hot-dip galvanized cargo box frame
• Main chassis beams (with variable cross-section) of the cargo box frame made of bended high-strength steel sheets
• Galvanized cargo box floor welded from two 5 mm thick steel sheets, bolted and riveted
• Hot-dip galvanized lower chassis frame (protection inside and outside the profiles), frame longbeams made of 200x80x6 and 160x80x6 mm box profiles
• Parking handbrake with a crank
• Hot-dip galvanized grain discharge chute with a lock in the rear wall
• Adjustable drawbar support spring
• Type-approved, hot-dip galvanized bumper
• Dropside tie cables
• Tipping system protected by a shut-off valve against excessive cargo box tilt
• Lighting system connection cable with a 7-pin 12V plug
• Full LED lighting
• Hydraulic cargo box tipping system made of electro-galvanized steel pipes and flexible hoses
• Tractor hydraulic connection type ISO 7241-1 DN 12.5
• Type-approved, dual-line pneumatic braking system with automatic braking force regulation and an output for a second trailer
• Rear hydraulic, electrical, and brake outputs for a second trailer
• New 500/50-17 wheels Axles from the renowned ADR company, solid square beam with an 80 mm cross-section, 350×90 mm brake
• Suspension on parabolic leaf springs
• Two wheel chocks stored in galvanized holders
• Telescopic cylinder with an articulated mount, four-stage with a 1700 mm stroke.
• Effective force on the fourth stage with a 120 mm diameter, at a nominal pressure of 16 MPa = 180 kN (~18.3T)
• Wheel mudguards