T-118 EU

Description

Single-axle three-way tipping trailer with a payload of 6 500 kg and a load volume of 4.3 m³ (8.6 m³ with extension walls). Hot-dip galvanised frame and body for long service life. EU type-approved for use on public roads.

Features and equipment

• Wall height 500 mm, 2.5 mm thick, hot-dip galvanized
• Central wall locking system (bottom dropsides)
• External ladder and steps inside the cargo box, hot-dip galvanized with anti-slip treads for easy access to the cargo box
• Hot-dip galvanized cargo box service support
• Rigid drawbar for connection to the tractor’s upper or lower hitch with a replaceable eye, drawbar type-approved in accordance with UN ECE Regulation 55
• Bolt-on towing eye, 40 mm diameter
• Hot-dip galvanized cargo box frame
• Main chassis beams of the cargo box frame made of 160 mm hot-rolled U-channels
• Galvanized cargo box floor made of a single 4 mm thick steel sheet, bolted and riveted
• Hot-dip galvanized lower chassis frame (protection inside and outside the profiles), frame longbeams made of 160x80x8 mm rectangular profiles
• Parking handbrake with a crank
• Hot-dip galvanized grain discharge chute with a lock in the rear wall
• Mechanical parking jack with a crank
• Type-approved, hot-dip galvanized bumper
• Dropside tie cables
• Tipping system protected by a shut-off valve against excessive cargo box tilt
• Lighting system connection cable with a 7-pin 12V plug
• Hydraulic cargo box tipping system made of electro-galvanized steel pipes and flexible hoses
• Full LED lighting
• Tractor hydraulic connection type ISO 7241-1 DN 12.5
• Type-approved, dual-line pneumatic braking system with manual braking force regulation
• Rear hydraulic, electrical, and brake outputs for a second trailer
• New 400/60-15.5 wheels
• Axles from the renowned ADR company, solid square beam with an 80 mm cross-section, 300×90 mm brake
• Two wheel chocks stored in galvanized holders
• Telescopic cylinder with an articulated mount, four-stage with a 1300 mm stroke.
• Effective force on the fourth stage with a 105 mm diameter, at a nominal pressure of 16 MPa = 138 kN (~14T)