FIG. 112Manure spreaders
- Payload (technical)
- ~6 000 kg
- Payload (registered)
- ~6 000 kg
- Volume (heaped)
- 7 m³
- Spreading width
- ~6-8 m
Payload (technical) · ~14 360 kgPayload (registered) · 6 360 kg
N-114 Zeus EU
- Payload (technical)
- 14 360 kg
- Payload (registered)
- 6 360 kg (7360 kg with K80 hitch)
- Volume (heaped)
- 12.7 m³ (heaped 15.5 m³)
- Spreading width
- 18 – 24 m
Description
High-capacity single-axle manure spreader with 14 360 kg payload and 12.7 m³ capacity, equipped with an A2V adapter with 2 large vertical beaters (spreading width ~18 – 24 m). Hot-dip galvanised frame and body for long service life. EU type-approved for use on public roads.
Features and equipment
- Side walls bent with 1 sheet of sheet 4 mm with S355 steel with a height of 1,480 mm with walls stiffening profiles – hot-dip galvanised
- A2V adapter – 2 balanced inclined vertical drums with bolted knives, with lime board, hot-dip galvanised
- Exchangeable floor made of hot-dip galvanised flat sheet
- Shock-absorbing, homologated, hot-dip galvanised drawbar with exchangeable hitch eye according to Regulation 55 UN ECE
- The drawbar is damped and positioned by means of hydraulic cylinders with two accumulators
- Hydraulic advance of conveyor with stepless regulation and overload valve
- Hot-dip galvanised hydraulic rear wall
- Hot-dip galvanised divided deflectors opened hydraulically
- Hot-dip galvanised front guard, meeting safety requirements
- Bolted drawbar diam. 50
- Hot-dip galvanised support frame made of elevated strength steel sheets
- Hydraulic shaft support partially hot-dip galvanised
- Hot-dip galvanised conveyor chain – 14×50 links
- Exchangeable, hot-dip galvanised conveyor strips made of metallurgical C65 profile
- Parking brake made with the assistance of spring membrane cylinders
- Hot-dip galvanised foldable exterior ladder with anti-skid steps, facilitating access to the load box
- Star wheels made of spheroidal graphite iron
- EU homologation
- Lighting installation connector cable with 7PIN 12V plug
- 12V lighting, homologated, for bulbs
- Pneumatic double-circuit brake system with manual braking force adjustment
- Hydraulic installations made of galvanised steel tubes and flexible hoses
- Hydraulic connectors to tractor, type ISO 7241-1 DN 12.5
- New 580/70 R38 wheels
- Axles from the renowned ADR company, full beam with 150 mm square cross-section, 406 x 140 brake
- Other elements
- Two wheel chocks placed in galvanised pockets
- Articulated shaft for coupling to tractor
- Rigid suspension
- Drive shafts coupled to articulated PTO shafts equipped with clutch protecting the transmission: friction and one-way
- Exchangeable adapter blades
- Exchangeable, galvanised skids of fl oor conveyor strips
- Wood skids for conveyor chains under upper frame
- Floor conveyor powered by two transmissions, 4000 Nm each
- Hot-dip galvanised bracket for connectors, adjustable
- Wall brackets equipped with reinforced edge seal preventing damage to walls’ galvanised coating
- Rear wall opening height indicator
- Mudguards with flaps
Specifications
| 01Payload (technical) | ~14 360 kg |
|---|---|
| 02Payload (registered) | 6 360 kg (7 360 kg with K80 hitch) |
| 03Min. tractor power | 88 kW / 120 HP |
| 04Volume (heaped) | 12.7 m³ (heaped 15.5 m³) |
| 05Spreading width | ~18 – 24 m |
| 06Design speed | 30 km/h |
| 07Own weight | ~6 640 kg |
| 08Max. axle load (registered) | 10 000 kg (technical 17 000 kg) |
| 09Max. drawbar load | 3 000 kg (4 000 kg with K80 hitch) |
| 10Length | 7 870 mm |
| 11Width | 2 910 mm |
| 12Height | 3 250 mm |
| 13Wheel track | 2 155 mm |
| 14Box inner length | 640 mm |
| 15Box inner width | 1410 / 2 470 mm |
| 16Side wall height | 1 480 mm |
| 17Opening side walls | no |
| 18Floor / wall sheet thickness | 3/4 mm |
| 19Platform height | 1 345 mm |
| 20Loading height | 2 825 mm |
| 21Axles | 1 |
| 22Suspension | rigid |
| 23Tyres | 580/70 R38 |
| 24Drawbar hitch height (min.) | 540 mm |
| 25Drawbar hitch height (max.) | 760 mm |
| 26Spreading adapter | A2V – 2 vertical beaters |
| 27Adapter drive | mechanical, from PTO |
| 28Conveyor drive | hydraulic |
Specifications may vary with configuration. Ask our sales team for the exact specification.
Interested in this model?
Ask for price, availability and delivery time. We reply within one working day.
Related models
FIG. 112
FIG. 113Manure spreaders
- Payload (technical)
- ~6 000 kg
- Payload (registered)
- ~5 780 kg
- Volume (heaped)
- 7.2 m³
- Spreading width
- ~6-8 m
FIG. 114Manure spreaders
- Payload (technical)
- ~6 000 kg
- Payload (registered)
- ~6 000 kg
- Volume (heaped)
- 7 m³
- Spreading width
- ~6-8 m
FIG. 115Manure spreaders
- Payload (technical)
- ~8 240 kg
- Payload (registered)
- ~8 240 kg
- Volume (heaped)
- 9 m³
- Spreading width
- ~6-8 m